STM2048 Multichannel Frequency Stability Testsetr is a special test equipment developed
specifically for the characteristics of frequency, the equipment supporting the host computer
software, the frequency accuracy, frequency stability, frequency drift, phase drift and other
frequency signal characteristics test. It can replace the traditional phase ratio meter and frequency
scale comparator. Can achieve 0.5MHz ~ 30MHz arbitrary frequency point test, specific operation
is simple, the measurement of high precision characteristics
Product Features
Can simultaneously measure frequency stability, aging, phase drift and other parameters
Measurement frequency range: 0.5MHz~30MHz
Frequency stability: <6E-14 (typical value: 3E-14)
Multi-channel: 4 channels as standard, expandable to 16 channels (including reference input signal)
The complementary measurement signal and the reference signal do not need to be the same frequency
Sampling time: 1ms~1000s
Equipped with an upper computer, the measurement results are displayed and stored in real time
Product Features | Specifications |
Input Signal | Reference input frequency: 0.5MHz~30MHz Reference input power: 5dBm~15dBm Measurement input frequency: 0.5MHz~30MHz Measuring input power: 5dBm~15dBm Input Signal Impedance: 50Ω Input signal waveform: sine wave/square wave Number of channels: 4 channels (expandable to 16 channels) |
Measurement output | Measurement uncertainty: <6E-14@1S(Typical values:3E-14@ 1S) Specific phase accuracy: <100fs(Gating time 1S) Sampling time: 1ms,10ms,100ms,1s,10s,100s,1000s Power measurement accuracy: 0.1dB Measurement configuration mode:Input frequency automatic recognition |
Interface | Communication interface: RJ45, Adaptive Ethernet |
Power | Input Voltage: Module Version: 12.0V±5% DC Chassis Version: 220VAC(176V~264V)50Hz(47Hz~63Hz) Power: ≤15W |
Environment | Operating temperature: 0℃-+50℃ Storage temperature: -40℃-+85℃ |